MODEC is awarded Approval-in-Principle from American Bureau of Shipping for LCO2 Floating Storage and Injection Unit (FSIU)

Tokyo, Sep. 11, 2025

MODEC, Inc. ("MODEC") has been awarded an Approval in Principle (AiP) from American Bureau of Shipping ("ABS") for a Floating Storage and Injection Unit "LCO₂FSIU" that is capable to receive, temporarily store and ultimately inject carbon dioxide (CO₂).

The FSIU would be able to receive LCO₂ transported in low pressure condition, store, and inject it into subsea wells at high pressure for permanent sequestration, which eliminates a need for onshore LCO₂ receiving plant and pipeline to injection wells. The unit is engineered for a maximum CO₂ injection capacity of 10 million tonnes per annum (MTPA), with a minimum total tank storage capacity of 100,000 m³.


MODEC LCO₂ FSIU, showing dual offloading to MOL LCO₂ Carriers.   Image by MODEC Inc., Ltd.


MODEC LCO₂ FSIU, showing dual offloading to MOL LCO₂ Carriers.   Image by MODEC Inc., Ltd.

To support uninterrupted injection operation, the FSIU will feature both tandem loading at the aft and simultaneous side-by-side loading at the midship port side, enabling flexible and efficient LCO₂ transfer from LCO₂ carriers, up to 90,000 m3 capacity (tandem) and up to 50,000 m3 (side-by-side). The FSIU hull was developed in collaboration with Mitsubishi Shipbuilding Co. Ltd. (MSB), while the mooring system incorporates a SOFEC External Turret to allow dual loading operation as well as station keeping in non-directional environment as often found in Southeast Asia. The FSIU will also be equipped with diesel engine generators integrated with a carbon capture system on the topside, minimizing operational CO₂ emissions.

This concept was developed in collaboration with Mitsui OSK Lines Ltd. ("MOL"), to leverage their experience and market position with LCO₂ carriers and its proven methods of safe storage, transport and offloading.

By serving as an offshore storage and injection hub, the FSIU enables the sequestration of CO₂ into qualified reservoirs. By offering large-scale, flexible, and reliable offshore CO₂ storage, this solution supports the global transition to low-carbon energy.

This collaborative approach is positioned as a further example of a "Concept Design of Floating Alternative Energy Production Facility" as stated in the Mid-term Business Plan 2024-2026 "Explore a Sustainable Future with Innovation". The concept of carbon storage and injection is achieved by leveraging MODEC's expertise in overall layout, hull design and mooring technology, cultivated in Oil & Gas FPSO projects, with MOL's expertise in LCO₂ transport. This FSIU is designed for a wide range of offshore field locations and potential clients.


ABS presented AiP to MODEC at Gastech 2025 in Milan, Italy, Right: Miguel Hernandez, ABS Senior Vice President, Global Offshore, Left: Soichi Ide, MODEC Group Executive Managing Officer, Head of Floating Production Solutions, Group Chief Digital Officer.   Image by MODEC Inc., Ltd.

MODEC considers this AiP as further demonstration of a floating solution for alternative energy production and will continue to strive to refine and mature this concept to address the key challenges for commercialization identified during this development. We will contribute to the effective reduction of emissions through innovative, technically sound and cost-effective solutions, continuing in striving to achieve the decarbonization of the global energy supply chain through developing new technologies for a sustainable future.

Arata Kamishohara, VP Business and Project Development at MODEC noted:
"While this FSIU is a new concept, each component on the unit is not necessarily new to MODEC. MODEC has experience of CO₂ injection (removed from pre-combustion produced gas) and dual (oil) offloading system. All the utility systems are similar to what we do on FPSOs every day. We collaborated with MOL, who cover the transportation portion of CCUS value chain, for interfaces between LCO₂ carriers and the FSIU. With this, we are planning to achieve $5/tCO₂ or less, which I don't think is a stretch target."

Miguel Hernandez, Senior Vice President, Global Offshore said:
"Carbon capture is advancing rapidly, with the International Energy Association projecting global capacity to reach 435 million tonnes per year by 2030. Floating storage and injection units, such as MODEC's innovative design, will be important for enabling the safe and efficient sequestration of captured carbon. This concept is a step forward in delivering the global carbon value chain and ABS is proud to support its development,"

Why do we need to take action ?
MODEC is committed to both advancing de-carbonization and materializing new business as part of its midterm business plan guided by our dedication to sustainability and innovation. By aligning with global efforts to combat climate change, MODEC aims to support its clients' decarbonization goals, comply with evolving environmental regulations, and enhance its Environmental, Social, and Governance (ESG) profile. These efforts not only reflect MODEC's responsibility to society and the environment but also position the company as a leader in driving technological innovation and sustainable practices within the energy sector. Through proactive emission reduction initiatives, MODEC is future-proofing its operations, strengthening its market competitiveness, and contributing to a more sustainable energy landscape.

MODEC Inc., Ltd. press release